Monday 19 January 2015

DIY Murphy Table

Kleinen Platz sinnvoll zu nutzen ist oft nicht so einfach. Meine Wohnung hat 27 m2 und da möchte man natürlich jeden Centimeter bis zum Anschlag ausnutzen. Eine Lösung, die ich für mich bei den Überlegungen zur Einrichtung meiner Wohnung gefunden habe, sind Möbel die man mehrfach nutzen kann, oder, noch besser, einfach verschwinden lassen kann. Ein richtiger Geheimtipp also, der auch noch dazu super einfach zu machen ist und kein großartiges handwerkliches Geschick vorraussetzt. Darf ich euch vorstellen: Der Murphy Table!

Making the most out of a small place is a problem that makes a lot of brains fry. As my apartment is only 27 m2 I wanted to take adventage of every single one of it. It took me a lot of thinking time, but finally I came up with a solution for my little problem: The best way to do it, is to use furniture with multiple features, or, even better, build yourself something that can easly disappear and change into something else. Sounds like magic? Believe me it may looks like it, but it is something you can easly craft yourself. So let me introduce to you: The Murphy Table! 

 Was brauchst du? 


* Tischplatte (beliebige Größe)
* hier: altes Nähmaschinengestell (alternativ: jedes nur denkbare andere Untergestell, der Fantasie sind keine Grenzen gesetzt, es sollte jedoch ca normale Tischhöhe haben, also in etwas 75cm)
* Zwei Werfgehänge; hier: Typ 62, 250x35 mm (alternativ: Scharnier)
* Sturmhaken mit Öse; hier: 120x5,8 mm
* Holzschrauben
* Schrauben + passende Mauerdübel




What you need: 

* table top (optional size)
* old sewing machine stand (alternativ: any other imaginable stand, simply free your mind and get creative, but it should have normal table height which is approx. 75 cm)
* Two ornamental strap hinges (be sure that they are big enough to carry the weight)
* Hook & Eye
* Woodscrews
* Screws + wall dowels 
Wie wirds gemacht? 

1.) Untergestell finden

Für meinen Tisch habe ich als Untergestell einen alten Nähmaschinentisch gefunden. Ich mag die schwarze Eisenoberfläche und die schönen Verzierungen und finde das Teil gibt dem ganzen einfach nochmal einen industriellen Touch. Da solche Gestelle aber leider nicht wie Sand am Meer zu finden sind würde ich euch empfehlen einfach auf Flohmärkten zu schauen, oder auch auf Willhaben oder Ebay, aber auch euer eigener Dachboden könnte so manche Schätze verborgen halten, also macht euch einfach auf die Suche!

Ihr könnt aber natürlich auch jedes andere Teil als Untergestell verwenden, wie gesagt, eurer Fantasie sind hier keine Grenzen gesetzt. Zum Beispiel könntet ihr alte Holzkisten nehmen oder auch selber ein Gestell aus Holz bauen. Wichtig ist nur dass es einen stabilen Stand hat und ca 75 cm hoch ist. Außerdem ist es sehr praktisch wenn das Untergestell leicht wegzuräumen ist (meine Nähmaschine hat zum Glück Rollen das macht das ganze um vieles leichter)

1.) Find a suitable stand 

For my table I used an old sewing machine stand as a lower frame. I'm totally in love with the black surface and the beautiful ornamental decorations, it really gives the whole thing an industrial touch that I absolutely adore. However, these stands are not availabe ten a penny.  I suggest you to search the fleamarket, ebay or your own attic, that's most of the time where all the treasures are hidden. 

You can also use any other imaginable stand for this table, only the sky's the limit ;) For example you can use old wooden boxes or you can build yourself an own stand out of wood. The only important thing is that the lower frame is approx. 75 cm high. It is also pretty useful if you can easily put your stand away (mine has rolls, that makes it really easy)


2.) Tischplatte an der Wand befestigen

Um euren Tisch stabil zu machen, damit er nicht wackelt, und ihr ihn später auch ganz einfach wegklappen könnt, müsst ihr ihn an der Wand befestigen. Dafür stellt ihr einfach euer Untergestell in den Raum und legt eure Platte darauf. Am hinteren Teil wo die Tischplatte an die Wand anstößt wird sie dann sicher befestigt. Dazu nehmt ihr eure zwei Werfgehänge, messt die Mitte der Tischplatte aus, und geht dann nochmal, je einmal nach links und einmal nach rechts, ein Viertel der Tischlänge zurück. Nun haltet ihr die Werfgehänge an der gewünschten Stelle am Tisch an markiert durch die Löcher wo ihr später in die Wand bohren müsst. Nehmt nun ein paar Holzschrauben und befestigt die Scharniere an eurer Tischplatte.

Als nächsten Schritt müsst ihr die Löcher in die Wand bohren. Ich hab dazu eine Schlagbohrmaschine verwendet damit ich auch ordentlich in die Mauer komme. Bitte passt unbedingt auf dass hinter eurer Wand keine Wasser- oder Stromleitungen verlegt sind, oder die Wand möglicherweise zu dünn ist. Auch bei Kaminen müsst ihr aufpassen, die dürft ihr nämlich im Regelfall überhaupt nicht anbohren.

Sobald ihr die Löcher gebohrt habt, gebt ihr die Mauerdübel hinein und könnt nun eure Werfgehänge auch an der Wand befestigen. Wichtig dabei ist dass die Mauerdübel und die Schrauben den gleichen Durchmesser haben damit am Ende eine feste Verbindung entsteht.

Nun müsste eure Tischplatte bereits sicher mit der Wand verbunden sein, nicht mehr wackeln und ordentlich auch dem Untergestell aufliegen.

2.) Secure the table top onto the wall 

To make sure that your table will not totter and has a secure stand, so you can easily fold it away afterwards, you need to fix it to the wall. Therefore you just have to put your table top on your lower frame, on the side where the plate touches the wall you are going to drill the holes. Simply take your ornamental strap hinges, measure the middle of your table width and go one quarter of the whole width back, one time to the right, one time to the left. Hold your hinges onto these marks and mark where you'll drill the wholes into your wall later. Now take a few woodscrews and fix the hinges onto the table. 

As a next step you have to drill the holes into the wall. I used a hammer drill to do it. Please make sure that there are no water pipes or power supply lines in this part of the wall, or if the wall is maybe not thick enough to carry the weight. Furthermore don't drill if there's a chimney in the wall!

As soon as your holes are in the wall, put the wall dowels in and fix your hinges onto it. The important thing is that the screws and the dowels are the same diameter, otherwise your connection won't be safe. 

Now your table top is securely fixed to the wall, it won't totter anymore and you can easily fold it away.

3.) Sturmhaken und Öse befestigen 

Damit euer Tisch beim Hinaufklappen auch oben bleibt müsst ihr als nächsten Schritt den Sturmhaken und die dazugehörige Öse montieren.  

Zuerst befestigt ihr die Öse auf der Unterseite der Tischplatte. Einfach auf der vorderen Kante, auf der Unterseite, in der Mitte mit zwei Schrauben anschrauben. Danach klappt ihr die Platte nach oben, nehmt den Sturmhaken, hakt ihn in die Öse ein und haltet ihn so an die Wand dass später die Verbindung auch ordentlich hält. Makiert wieder durch die Löcher wo ihr später bohren müsst. Klappt nun die Platte wieder nach unten und befestigt den Sturmhaken an der gewünschten Stelle.

3.) Fasten the hook onto the wall and the eye onto the table

So that your table top will stay on the wall when you fold it away you have to fasten the hook to the wall, and the eye to the underside of your table as a next step. 

First you have to fix the eye to the underside. Just measure the middle of the front side of the underside of the table and secure it with two screws. Now fold the plate to the wall, take the hook, hitch it to the eye and mark where you have to drill the wholes in the wall. Fold your plate away again, and fix the hook on the marked spot.  


 4.) Viel Freude damit!

Ja ihr seht, so einfach geht das! In nur wenigen Schritten habt ihr euer perfektes Zauberkunststück gebaut. Nun könnt ihr immer, wenn ihr wieder einmal etwas mehr Platz in eurer Wohnung braucht, zum Beispiel für Parties oder wenn Freunde bei euch übernachten, euren Essplatz ganz einfach an die Wand hängen. 

Der Tisch ist nicht nur super einfach und praktisch sondern die Unterseite könnt ihr auch noch super als dekoratives Bild in euren Wohnraum einpassen. Meine ist zwar noch unbemalt aber ich werde sie bald etwas aufschmücken. 

Viel Spaß euch allen mit diesem DIY und hier noch ein paar Bilder von meinem Essbereich.

4.) I hope you enjoy it! 

As you can see, it's really as simple as I told you. A small space hasn't to seem small too, make the most out of it and be happy with it! Now you are prepared for the next time you need a little more space for a party or a sleepover.

You can also decorate the underside of your table and you'll have a beautiful picture on the wall. I haven't had the time to paint mine yet, but I'm sure I will do it as soon as possible! :)

VORHER/BEFORE
NACHHER/AFTER
Credits:
Idea, Text, Photos: Clarissa Kober

1 comment:

  1. Ich finde deinen Einrichtungsstil auf jeden Fall richtig schön :)
    Liebst, Lea.
    http://erdbeertiramisu.blogspot.de/

    ReplyDelete